Main functions
- Good reliability
- Small in volume, light in weight
- Nice appearance
- Easy installation
- May select 35mm DIN rail installation and installation on the board.
- May select 5+1 digits register by step type or 7 digits LCD display.
- May select infrared carrier wave communication and RS485 serial port communication.
- Impulse output when no power, complying with standard DIN43864
Model & Ordering
Specification
- Nominal voltage (Un) : 230/400V AC (3~)
- Operational voltage : 161/279 ¡V 300/520V AC (3~)
- Insulation capabilities :
- AC voltage withstand : 2KV for 1 minute
- Impulse voltage withstand : 6KV ¡V 1.2µS waveform
- Basic current (Ib) : 20A
- Maximum rated current (Imax) : 100 A
- Operational current range : 1A - 100A
- Over current withstand : 3000A for 0.01s
- Operational frequency range : 50Hz + 10%
- Internal power consumption : <2W / 10VA per phase
- Test output flash rate (PULSE LED) : 160 impulses per kWh
- Remote output flash rate (SO LED) : 10 impulses per kWh
- Test pulse output rate (pins 7 & 8) : 160 pulses per kWh
- Remote pulse output rate (pins 15 & 16) : 10 pulses per kWh
- Power supply indicator (L1, L2 & L3 LED) : Meter is connected and working OK
- Consumption indicator (PULSE & SO LED) : Flashing at load running
¡@ |