- About Power Meter EPM 7000
EPM 7000 power meters are conceptualized and intelligent to revolutionize to revolutionize to traditional power metering
industrial. Each power meter is a compact, electronically advanced and programmable multi-display metering device (MDMD).
It is the answer to future electrical generation and solution.
- PLC Modbus(R) Compatible
The Modbus(R) communications protocol allows information and data to be efficiently transferred between EPM 7000 and Modicon
programmable logic controller (PLC) or other third party Modbus(R) compatible monitoring and control system. The EPM 7000 can
also establish a monitoring system by just simply adopt an IPC-based centralized master display software. The RTU mode Modbus(R)
protocol with default baud rate 9600 bps, 8 data bit.
- Increase Productivity & Efficiency
The power meters are specifically designed to be compatible with the world's most widely used DIN standard panel as DIN
92 * 92mm panel cutout holes. It is also a standardize hardware suitable for either 1 phase
2 wires, 1 phase 3 wires, 3 phase 3 wires or 3 phase 4 wires networks.
- Improved Technical Superiority and Reliability
The power meters are endowed with technical specifications (overload capabilities, accuracy levels, long term stability,
readout dependability etc.) far exceeding conventional instruments. The software provides a simple yet practical solution to
energy management in factories and plant, small industries, building services, etc.
- Factory & Building Automation ( FA & BA )
EPM 7000 was developed for factory and building automation (FA & BA) applications. EPM 7000 allows more power and energy
parameters to easily apply to wide range of AC switch-gear or power distribution system for metering.
- Field Programmability
The field programmable power meter is able to set e.g. CT and PT ration, Modbus(R) address, communication baud rate,
meter's display, etc. either through rear RS-485 communication port or a maintain port on the front panel with a
communication module RX-024 made by HCE.
- Comprehensive System Integration
With PLC compatible RS-485 / RS-232 (Option) Modbus(R) communication protocol, the 7000 series allows information and data
to be efficiently transferred between power meter EPM 7000 RTU, Power SCADA system, DCS system.