- About Power Meter HC 6010
HC 6010 power meters are conceptualized and intelligent
to revolutionize the approach to traditional power metering.
Each power meter is a compact, electronically advanced
and programmable multi-display metering device (MDMD).
It is the answer to future generation of electrical metering
needs and methodology.
- Environmental Impact & Cost Saving
A power meter can replace many units of conventional
analog or digital instruments and change over switches
(e.g. Amp, Volt, KVA, KW, PF, KWH, KVarH, FQ etc.).
This saves on the wiring material usage and reduces the
cost on metering needs.
With the power meter modern and practical MDMD, the
front layout of switch boards and control panels are aesthetically
refined.
- Increase Productivity & Efficiency
The power meters are specifically designed to be compatible
with the worldˇ¦s 2 most widely used DIN standard panel
instruments (It fits the DIN 92 x 92 mm panel cutout
holes).
The power meter as a MDMD greatly reduced cabling complexity
and time. It is also a standardize hardware suitable
for either 1 phase 2 wires, 1 phase 3 wires, 3 phase 3 wire
or 3 phase 4 wires networks.
- Improved Technical Superiority and Reliability
The power meters are endowed with technical
specifications, (overload capabilities, accuracy levels, long
term stability, readout dependability etc.) far exceeding
those of conventional instruments. To overcome the critiques
of digital metering, the power meter MDMD supports
a VFD (Vacuum Fluorescent Display) screen with
green (naturally comfortable) alphanumeric readouts.
This allows visual clarity at long distance yet avoid parallax
errors for close range viewing. The multi-display readings
can be ˇ§dampedˇ¨ through it readout resolution
besides the option to manually or automatically prioritize
and sequentially view the more than 30 electrical parameters.
To meet future metering environments, the power meter is
equipped with a serial port (RS-485 or RS-232), to allow
connection to an open architecture computerized network.
Running on PC or data acquisition system and complying
with Modbus(R) protocol. The software provides a simple
yet practical solution to energy management in factories
and plant, small industries, building services, etc.
- Parameter Conversion
The microprocessor-based power meter now provides compatibility
with the modicon Modbus(R) system as a standard
featured. From the VFD multi-display reading V, A, VA, W,
Var, WH, etc. more than 30 power and energy parameters.
Via the RS-485 Modbus(R) communications, including the
instant maximum and minimum of all parameters, maximum
demand control, time stamping, etc. more than 90
parameters can be achieved by remote monitoring system.