HC FP series transducer are a family of metal case transducer for Measuring and conversion of IEC 688 / 1992 - 04, set in a Wall Mount.
FPD is the one unit DC voltage/current transducer with one output.
Accuracy ( 23 ± 3 °C ) : 0.25% of effecive range
Linearty & repeatability : 0.05% typical
Dielectric strength :
1500Vac ... power / input & output terminals
1800Vac ... input / output / case
Maximum output load :
DC current mode : maximum 10V drop
DC voltage mode : maximum 10mA drive
Maximum input over:
≦ 300Vrms continuous ... > 2V ranges
≦ 150Vrms continuous ... ≦ 2V ranges
≦ 150mA continuous for current input
Input resistance-ohm :
≧ 100M ... ≦ 2V ranges, ≧ 500K ... >2V ranges
≦ 20 ... for all current input range
Power effect : < 0.003% for per volt change
Response time & ripple : 250 ms typically, ripple < 0.1% rms ro
Common mode rejection : 120dB, DC to 60Hz
Temperatured stability : ≦ 0.007% ro per degree C
Storage condition : Temperature range -10 to 70°C, RH 20 to 95% non condensed
Operating condition : Temperature range -5 to 55°C, RH 20 to 95% non condensed
Power supply :
±10% of rated, less 3.5 VA for AC input
±10% of rated, less 3.5 Watt for DC input
Construction : Socket plug-in type with barrier terminals
