SPS-Metal Case

下載產品諮詢

HC SP系列設計使用堅固的鋼製外殼，具有良好的抗電磁干擾能力及較高的電氣過載能力。是具有穩定可靠的量測單元，適用於現場操作及實驗室。

SPS位置轉換器，具有一個類比輸出。SPS提供了可選的定子或轉子輸入

0 to 1 mAdc 標準輸出 ; 可選配其他需求
具有抗高磁場干擾能力 ;輸入/輸出具有AC 1800V隔離能力
符合IEEE SWC 測試標準
動態零起始角，無需重新設置機械軸

Accuracy : 1% RO / 23 ± 3 °C
Input of stator :
- Effective range : 60 / 120 / 240 + 40% order on request
- Angle of conversion : Standard 330° ± 30°
- Burden : < 1VA of maximum range
- Frequency : 55 - 65 Hz
- Protection : Full protection for SURGE, EMI & RFI
Input of rotor :
- Effective range : 90 - 140 / 180 - 280V order on request
- Burden < 3.5VA
Output ( isolated with input ) :
- Range :
  - Standard : DC0 - 1mA vs required rotating angle
  - Option :
  - DC 0 - 5 / 0 - 10 / 0 - 20 / 4 - 20mA
  - DC 0 - 1 / 0 - 5 / 1 - 5 / 0 - 10 / 2 - 10V
- Drive abilities : Maximum 10Kohm for 0 to 1 mA output
  - > 10V for current output mode
  - > 10mA for voltage output mode
- Output impedance > 30 Mega ohm
- Response time < 600 ms from 0 to 99% RO at operating
- Ripple < 0.5% P-P RO
- Long term stability < 1% RO per year
- Temperature stability < 0.1% per degree C, from 99% RO at operating
- Adjustment : Span, zero ±5% / 10% ro request, zero shifter / 0 - 360°, fine / ± 15°
- Protection : No damage ... open or short; full protection for SURGE, EMI, & RFI
- Magnetic effect < 0.04% at center 400 A-T / M
Operation condition :
- Temperature Environment : -5 ~ 60 °C
- Humidity : 20~99% RH non condensed
- Elevation : Under 3000 meters
- Magnetic Field : 500 A-T / M
- Waveform : Sinusoidal wave form only
- Dielectric strength : 4KV AC rms 1 minute between input / output / power / case; fulfills IEC688 standards
- Impulse Test : ANSI C37.90 / 1989, IEEE 587 / 1983, IEC 255-3, 6KV ( 1.2 * 50us), 3KA (8 * 20us)... current only
- Surge Test (ring wave) : IEEE 587 / 1983 (3KV - 0.5 us / 100 KHz), IEC255-3 (2.5KV - 0.25ms / 1MHz)