PSD is the programmable DC signal isolation transmitter, user can use input and output switch to change input range and output value, design of the socket plus-in type with barrier terminals, provide a reliable and stable wide signal conversion.
Field - rangeability
Wide switchable input ranges
1mV to 200V / 50uA to 50mA
Wide switchable output ranges
Over 20 standard process signals
Accuracy 0.1%
Input / output isolation 1.6KVdc
Available standard or custom calibration
Accuracy ( 23±3°C ) : 0.1% of effective range
Linearity & repeatability : 0.05% typical
Temperature stability : ≦ 0.007% ro per degree C
Configuration :
Field rangeability
Switchable input range , span gain & offset
Voltage .... 1mV to 200V , current ..... 50uA to 500mA
Switchable output ..... listed in output ranges
Input resistance - ohm :
≧100MΩ ..... ≦2V range ,
≧500KΩ ..... > 2V ranges
≦20Ω ..... for all current input ranges
Maximum input over :
≦300V rms continuous ..... > 2V ranges
≦150V rms continuous .... ≦2V ranges
≦150mA continuous for current input
Power effect : < 0.003% for per volt change
Response time & ripple : 250ms typically , ripple < 0.1% rms of span
Common mode rejection : 120db DC to 60 Hz
Dielectric strength :
1500Vac ..... power / input & output terminals
1600Vdc ..... input / output terminals
Output drive capability : ≦10 mA for voltage mode , ≦10V for current mode
