





HC SP/USP系列設計使用堅固的鋼製外殼,具有良好的抗電磁干擾能力及較高的電氣過載能力。是具有穩定可靠的量測單元,適用於現場操作及實驗室。
USPR-2溫度轉換器,具有兩組類比輸出。USPR提供了量測50~20k歐姆可選擇的範圍
*SP系列為傳統類比產品,USP系列為新數位化產品。SP系列產品部份由USP系列替代,輸入輸出端子及功能皆相同,可以直接替代。
USPR-2溫度轉換器,具有兩組類比輸出。USPR提供了量測50~20k歐姆可選擇的範圍
*SP系列為傳統類比產品,USP系列為新數位化產品。SP系列產品部份由USP系列替代,輸入輸出端子及功能皆相同,可以直接替代。
- 0 to 1 mAdc 標準輸出 ; 可選配其他需求
- 具有兩組獨立輸出
- 具有抗高磁場干擾能力 ;輸入/輸出具有AC 1800V隔離能力
- 符合IEEE SWC 測試標準
- 三線式電阻輸入,可消除接線阻抗
- Accuracy : 0.25% RO / 23 ± 3 °C
- Input ( each element ) :
- Range : 0 - 50 / 0 - 100 / 0 - 200 / 0 - 1K / 0 - 2K / 0 - 5K / 0 - 10K / 0 - 20Kohm ... range / order on request
- Configuration : Three wires type
- Sensing : DC constraint current
- Protection : Full protection for SURGE, EMI & RFI
- Output ( isolation with input ; Dual outputs / isolated each other ( 600Vdc )) :
- Range :
- 0 - 1 / 0 - 5 / 0 - 10 / 0 - 20 / 4 - 20 / 0 -50 / 10 -50mA
- 0 - 1 / 0 - 5 / 1 - 5 / 0 - 10 / 2 - 10V
- Standard calibration 0 - 1mA vs required input range
- Option calibration under required input range
- Drive abilities :
- > 10Kohm for 0 to 1mA standard output
- > 10V for current output mode
- > 10mA for voltage output mode
- Output impedance > 30 Mega ohm
- Response time < 400 ms from 0 to 99% RO at operating
- Ripple < 0.5% P-P RO
- Long term stability < 0.5% RO per year
- Temperature stability < 0.015% per degree C, from 0 to 55°C
- Adjustment : Span, zero ±5% ro minimum
- Protection : No damage ... open or short; full protection from SURGE, EMI, & RFI
- Magnetic effect < 0.04% at center 400 A-T / M
- Range :
- Operation Condition :
- Temperature Environment : -5 ~ 60 °C
- Humidity : 20~99% RH non condensed
- Elevation : Under 3000 meters
- Magnetic Field : 500 A-T / M
- Waveform : Sinusoidal
- Dielectric strength : 4KV AC rms 1 minute between input / output / power / case; fulfills IEC688 standards
- Impulse Test : ANSI C37.90 / 1989, IEEE 587 / 1983, IEC 255-3 ( 1.2 * 50us), 3KA (8 * 20us)... current only
- Surge Test (ring wave) : IEEE 587 / 1983 (3KV - 0.5 us / 100 KHz), IEC255-3 (2.5KV - 0.25ms / 1MHz)
- Power Supply :
- LO : DC 24 - 60V ± 20%
- HI : AC 80 - 260V @40 - 70Hz / DC 80 - 330V
- Dissipation Max. 12VA for AC / 10W for DC